The web console is available at http://192.168.4.1 while your laptop or mobile device is connected to the gateway's setup hotspot.
Menu
| Group | Pages |
|---|---|
| Top level | Overview |
| Sensors | Environment, Analog, Temperature probes, Inputs, Outputs, Modbus |
| Connectivity | Network, MQTT broker |
| System | Firmware, Diagnostics, Settings |
On screens 1180 px wide or narrower, use the menu button to open or close the navigation drawer. At 940 px and below, the status bar becomes compact and list/detail pages show one panel at a time. Use All settings, All outputs, All Modbus sections, or the equivalent back control to return to the list.
Status icons and sign out
The upper-right corner of every page contains:
- Wi-Fi or signal: Green when the gateway is online and crossed out when it is disconnected.
- Plug and battery: Shows whether external power is present and the current battery state.
- Sign out: Ends the current console session. Sign out whenever you finish configuring the gateway.
Overview dashboard
The dashboard refreshes automatically and presents the gateway's most important values on one screen.
| Panel | What it shows |
|---|---|
| Readings | Enclosure temperature and humidity, NTC, RTD, Analog 1-4, DO 1-3, and Relay. Disabled means the channel is not enabled. |
| Device | Device ID, Site ID, firmware version, MAC address, and hotspot name. |
| Network | Connection state, active network, signal strength, IP address, and MQTT broker status. Change network opens Network. |
| Power | Power source, battery state, and power consumption in mW. |
| Hardware check | Self-test result for each module. Full report opens Diagnostics. |
Saving, confirmations, and errors
- A changed section shows an Unsaved state until its save request succeeds.
- Live controls are disabled while their configuration is unsaved or while another request is running.
- Relay, digital-output, reset, delete, sign-out, and other consequential actions ask for confirmation before they run.
- A failed save leaves the edited values on screen and shows the relevant field or service error. Correct the value and retry.
- Saved password fields are intentionally blank. Leave them blank to keep the stored secret unless the page says a replacement is required.
- The console refreshes live status in the background. It does not overwrite a section that currently contains unsaved edits.